main image
sm-thumb-0
sm-thumb-1
sm-thumb-2
sm-thumb-3
sm-thumb-4
sm-thumb-5

EPOLOCK 1300

EPOLOCK 1300 is a solvent-free, two-component pure epoxy anchoring system designed for heavy-duty structural and rebar applications. It provides exceptional bonding and load capacity in cracked and uncracked concrete, with expansion-free performance. Its extended working time ensures reliable installation for horizontal, vertical, and overhead applications under static, dynamic, and seismic loads.

Product Properties

  • Exceptional Load-Bearing Capacity: The highest load-bearing capacity in cracked and uncracked concrete.
  • Suitable for Seismic Loads: Designed for use in static, dynamic, and seismic loading areas.
  • Strong Adhesion in Harsh Conditions: Powerful adhesion even in wet or water-filled cavities.
  • No Thermal Expansion Stress: Ideal for close-edge and short-spaced anchor placements.
  • High Thermal and Chemical Resistance: Dimensional and mechanical stability at high temperatures (HDT: 68.6°C) and excellent resistance to corrosive chemicals.
  • Wide Range of Applications: Compatible with a wide range of anchors (M8-M30) and rebar (diameter 8 to 32mm).
  • Free of Styrene and Low VOC: Safe for use in enclosed spaces and environmentally friendly.

Description

Specialized Applications

Post-Installed Rebar Placement for Strengthening and Retrofitting Structures

Installation and Securing Heavy Anchor Bolts in Foundations and Columns

Underwater Applications in Wet, Waterlogged, or Submerged Environments


Installation of Metal Structures, Guardrails, Overhead Cranes, and Heavy Industrial Machinery

Structural Applications in Corrosive Industrial and Marine Environments

Comprehensive Execution Guide

  1. Drilling: Create the hole with the specified diameter and depth by using a twist drill or core drill, as indicated in the construction drawings.
  2. Cleaning (Crucial): This step is essential for achieving maximum adhesion.
  • Step 1: Blow out dust with at least 4 blasts of compressed air from the inside of the hole.
  • Step 2: Using a wire brush appropriate for the hole diameter, clean the inner walls at least 4 times.
  • Step 3: Blow out any remaining dust with another 4 blasts of compressed air to ensure the cavity is free of any loose particles. The rebar or bolt must also be free of grease, rust, or contamination.

Preparation and Injection:

  • Open the cartridge cover and install the static mixer nozzle.
  • Step 1: Insert the cartridge into the injection gun.
  • Step 2: Inject a small amount of adhesive (to the length of the nozzle) outside the hole to ensure complete mixing of the two components and a uniform color mixture.
  • Step 3: Insert the nozzle to the end of the hole and simultaneously, while injecting, gently pull it outward to fill approximately two-thirds of the cavity.

Anchor Installation: 

Push the rebar or bolt into the adhesive-filled cavity in a rotating motion until the excess adhesive flows out of the cavity’s opening. Avoid moving it until the initial setting has occurred.

EPOLOCK1300

Packaging, Color Coding, and Supply
EPOLOCK 1300 is available in dual-cartridge packaging (400g) and other packaging sizes as required by the customer.